Courses

The Boat Transfer training is intended for personnel working in the wind industry, involved in the construction, maintenance and / or service for wind turbines and wind farms at Sea.  The Boat Transfer certificate is valid for 24 months. This training is part of the module GWO Sea Survival, however  you will not receive a GWO certificate. If you do need a GWO certificate, please book the full GWO Sea Survival instead. This Boat Transfer training contains: The use of personal protection equipment; Embark and disembark in a safe manner; Procedures in a man-overboard-situation (SAR, GMDSS Recovery and first aid); Evacuation procedures of wind turbines.

This complete Basic Safety training is accordingly to the guidelines of the Global Wind Organisation (GWO). This 6,5- day trainig is intended for personnel working in the wind industry, involved in the construction, maintenance and / or service for wind turbines and wind farms at sea. At the completion of this course you will receive all GWO certificates: First Aid Manual Handling Fire Awareness Working at Heights Sea Survival Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. On request we can organize this training in a different language for groups and if necessary with an interpreter. Specifics: In this training, the Working at Heights module is in cooperation with: Safe site Valbeveiliging BV Staalindustrieweg 19-21 2952 AT Alblasserdam A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Basic Safety Training (GWO) Combination Price €1990,- incl. WINDA registration fee Basic Safety Training (GWO) Refresher Combination Price €1305,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This complete Basic Safety Refresher Training (GWO) refresher is accordingly to the guidelines of the Global Wind Organisation (GWO). This four - days Basic Safety Refresher Training (GWO) is intended for personnel working in the wind industry, involved in the construction, maintenance and / or service for wind turbines and wind farms at sea. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. At the completion of this Basic Safety Training (GWO) Refresher course you will receive all GWO certificates: First Aid Refresher Manual Handling Refresher Fire Awareness Refresher Working at Heights Refresher Sea Survival Refresher Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: In this training, the Working at Heights module is in cooperation with: Safe site Valbeveiliging BV Staalindustrieweg 19-21 2952 AT Alblasserdam A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have valid Basic Safety Training (GWO) certifcates next to a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Basic Safety Training (GWO) Refresher Combination Price €1305,- incl. WINDA registration fee Basic Safety Training (GWO) Combination Price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). This two-day training Working at Heights GWO is designed for staff working in the wind industry, involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. The training Working at Heights GWO provides knowledge about the risks, legislation and inspection of equipment. In addition, skills are taught which are necessary for safely working at height. This course focusus on knowledge of the risks of working at height and the prevention of accidents. This Working at Heights (GWO) training contents: The hazards and risks of working at height in a wind turbine; Legislation of working at heights; The protective equipment, what is the European and global standard for this equipment Inspection, maintenance and proper storage of Personal Protection Equipment Safe use of anchors and ladders; Evacuation. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.45 on the first training day. The following day starts at 09.00 All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: The Working at Heights module is in cooperation with: Safe site Valbeveiliging BV Staalindustrieweg 19-21 2952 AT Alblasserdam You are expected at this adres for your training. A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Working at Heights (GWO) €648,- incl. WINDA registration fee Working at Heights (GWO) Refresher €355,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). This Working at Heights GWO Refresher training is designed for staff working in the wind industry, involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. The training Working at Heights GWO provides knowledge about the risks, legislation and inspection of equipment. In addition, skills are taught which are necessary for safely working at height. This course focusus on knowledge of the risks of working at height and the prevention of accidents. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Working at Heights (GWO) Refresher training contents: The hazards and risks of working at height in a wind turbine; Legislation of working at heights; The protective equipment, what is the European and global standard for this equipment Inspection, maintenance and proper storage of Personal Protection Equipment Safe use of anchors and ladders; Evacuation. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 08.45 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: The Working at Heights module is in cooperation with: Safe site Valbeveiliging BV Staalindustrieweg 19-21 2952 AT Alblasserdam You are expected at this adres for your training. A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid Working at Heights (GWO) certificate as well as an offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Working at Heights (GWO) Refresher €355,- incl. WINDA registration fee Working at Heights (GWO) €648,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The Training Manual Handling GWO is designed for staff working in the wind industry,involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. The delegates are taught knowledge and skills in providing first aid in and near wind turbines. In this training delegates will learn techniques for manual handling with the aim to reduce risks. The acquired knowledge and skills contribute to a safer working environment within the wind industry. This Manual Handling (GWO) training contents: The importance of working safely and responsibly in accordance with statutory requirements; Activities that increase the risk of muscle or skeletal injuries; Ways to work safely and in a healthy posture and correct use of equipment; Symptoms related to poor lifting technique; Reporting any accidents and injuries sustained; Thinking in terms of solutions with all the limitations posed by the act in a wind turbine; Risk mitigation techniques in the field of manual trading. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: This training is given in addition to other GWO trainingmodules or separate and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Manual Handling (GWO) €170,- incl. WINDA registration fee Manual Handling Refresher (GWO) €170,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The Refresher Training Manual Handling GWO is designed for staff working in the wind industry, involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. The delegates are taught knowledge and skills in providing first aid inside and near wind turbines. In this training delegates will learn techniques for manual handling with the aim to reduce risks. The acquired knowledge and skills contribute to a safer working environment within the wind industry. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Manual Handling (GWO) Refresher training contents: The importance of working safely and responsibly in accordance with statutory requirements; Activities that increase the risk of muscle or skeletal injuries; Ways to work safely and in a healthy posture and correct use of equipment; Symptoms related to poor lifting technique; Reporting any accidents and injuries sustained; Thinking in terms of solutions with all the limitations posed by the act in a wind turbine; Risk mitigation techniques in the field of manual trading. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: This training is given in addition to other GWO trainingmodules or separate and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Manual Handling Refresher (GWO) €170,- incl. WINDA registration fee Manual Handling (GWO) €170,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The Sea Survival Training GWO (Global Wind Organization) is intended for personnel working in the wind industry, involved in the construction, maintenance and / or service for wind turbines and wind farms at sea. This training provides knowledge and skills for survival at sea. This training provides theoretical and practical knowledge about emergencies on board of a ship and / or offshore wind installation. furthermore first aid, evacuation procedures and survival techniques will be part of this module. For the practical parts we use a KNRM lifeboat with jet propulsion. We also have an advanced pool where every type of weather can be simulated. This Sea Survival (GWO) training containts: The dangers and symptoms of hypothermia; The advantages and limitations of the various personal protection equipment used in the offshore wind industry; The use of personal protection equipment; Embark and disembark in a safe manner; Emergency procedures, safety equipment and measures on installations, ships and wind turbines; Procedures in a man-overboard-situation (SAR, GMDSS Recovery and first aid); Evacuation procedures of wind turbines; The basics of survival at sea, both individually and in groups. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following day starts at 08.30 training ends no later than 12.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Sea Survival (GWO) €560,- incl. WINDA registration fee Sea Survival (GWO) Refresher €309,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The Sea Survival Refresher Training GWO (Global Wind Organization) is intended for personnel working in the wind industry, involved in the construction, maintenance and / or service for wind turbines and wind farms at sea. This training provides knowledge and skills for survival at sea. This training provides theoretical and practical knowledge about emergencies on board of a ship and / or offshore wind installation. furthermore first aid, evacuation procedures and survival techniques will be part of this module. For the practical parts we use a KNRM lifeboat with jet propulsion. We also have an advanced pool where every type of weather can be simulated. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Sea Survival (GWO) Refresher training contents: The dangers and symptoms of hypothermia; The advantages and limitations of the various personal protection equipment used in the offshore wind industry; The use of personal protection equipment; Embark and disembark in a safe manner; Emergency procedures, safety equipment and measures on installations, ships and wind turbines; Procedures in a man-overboard-situation (SAR, GMDSS Recovery and first aid); Evacuation procedures of wind turbines; The basics of survival at sea, both individually and in groups. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid Sea Survival (GWO) as well as an offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Sea Survival (GWO) Refresher €309,- incl. WINDA registration fee Sea Survival (GWO) €560,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The training First Aid GWO is intended for personnel working in the wind industry, involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. In case of accidents, knowledge of first aid procedures is essential. This course covers the use of available emergency equipment. In addition this course is about the operation of normal functions of the human body and the symptoms of disease or injury to be treated. The delegates are taught knowledge and skills in providing first aid in and near wind turbines taking into account the limited space and entrance and exits available. This First Aid (GWO) training contents: Providing first aid safely; Basic knowledge about normal body functions, and symptoms of serious and minor injuries and illnesses (anatomy); Set priorities in dealing with an emergency in a wind turbine; Lifesaving first aid; Automated External Defibrillator (AED); Equipment in an emergency scenario; Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: This training is given in addition to other GWO trainingmodules or separate and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: First Aid (GWO) €648,- incl. WINDA registration fee First Aid Refresher (GWO) €353,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). The training First Aid GWO Refresher is intended for personnel working in the wind industry, involved in the construction, maintenance or service for onshore and/or offshore wind turbines and wind farms. In case of accidents, knowledge of first aid procedures is essential. This course covers the use of available emergency equipment. In addition this course is about the operation of normal functions of the human body and the symptoms of disease or injury to be treated. The delegates are taught knowledge and skills in providing first aid in and near wind turbines taking into account the limited space and entrance and exits available. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This First Aid (GWO) Refresher training contents: Providing first aid safely; Basic knowledge about normal body functions, and symptoms of serious and minor injuries and illnesses (anatomy); Set priorities in dealing with an emergency in a wind turbine; Lifesaving first aid; Automated External Defibrillator (AED); Equipment in an emergency scenario; Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: This training is given in addition to other GWO trainingmodules or separate and therefor training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Requirements for participation: In order to participate to the training, participants need to have a valid First Aid (GWO) certificate as well as an offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa  medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: First Aid Refresher (GWO) €353,- incl. WINDA registration fee First Aid (GWO) €648,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). This training Fire Awareness GWO is designed for staff working in the wind industry, on land and / or sea, involved in the construction, maintenance and / or service for onshore and / or offshore wind turbines and wind farms. The training Fire Awareness examines basic knowledge and skills on how to deal with fire. This Fire Awareness (GWO) training contents: The emergence and spread of fire; Risks of fire in wind turbines; Recognizing the first signs of possibility of fire in a wind turbine; Emergency plans in a wind turbine, including smoke detection and escape procedures; Operation and use of fire extinguishers. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: This training is given in addition to other GWO trainingmodules or separate and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Participants may not exceed 124 kilos in relation to the bearing capacity of the materials that are used during the training. We kindly advise you to bring your own safety shoes. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Fire Awareness (GWO) €273,- (incl. WINDA registration fee) Fire Awareness Refresher (GWO) €273,- (WINDA registration fee, excl. 21% VAT) Complete GWO Training Combination price €1990,- (WINDA registration fee, excl. 21% VAT) (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

This training is accordingly to the guidelines of the Global Wind Organisation (GWO). This Fire Awareness (GWO) Refresher training is designed for staff working in the wind industry, on land and / or sea, involved in the construction, maintenance and / or service for onshore and / or offshore wind turbines and wind farms. The training Fire Awareness examines basic knowledge and skills on how to deal with fire. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Fire Awareness (GWO) Refresher training contents: The emergence and spread of fire; Risks of fire in wind turbines; Recognizing the first signs of possibility of fire in a wind turbine; Emergency plans in a wind turbine, including smoke detection and escape procedures; Operation and use of fire extinguishers. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: This training is given in addition to other GWO trainingmodules or separate and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Specifics: A good physical condition is required. Requirements for participation: In order to participate to the training, participants need to have a valid Fire Awareness (GWO) cartificate as well as an offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Winda registration As from October 17, GWO training participants will have to register in WINDA for a delegate profile. Once you have completed your registration, you will receive a WINDA ID which you must send to info@STC-KNRM.nl before you complete the training. The WINDA ID is your personal identification and all of your future GWO training will be associated with this ID. Register for a Delegate profile using a smartphone, tablet or a computer at winda.globalwindsafety.org. Prices: Fire Awareness Refresher (GWO) €273,- incl. WINDA registration fee Fire Awareness (GWO) €273,- incl. WINDA registration fee Complete GWO Training Combination price €1990,- incl. WINDA registration fee (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-

The instruction is a short practice-based instruction. The AED can save lives and it is of importance that staff has knowledge concerning heart failure and the use of an AED. During the instruction the participants practice with an trainingsdevice. This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. This training contents: Why perform CPR with an AED Techniques of the AED Use of the AED Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in several occasions and therefor training times may vary. Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional information For groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option).

This 1-day practice-oriented Rigging & Slinging training (Refresher) is specially developed for operational personnel (riggers & banksman) who work on board of ships and / or on oil platforms. The purpose of this training is to retain the knowledge and skills that people have learned during the basic course and it ensures that your certificate is renewed. This training consists a combination of theory instruction, practice-oriented exercises and practice exercises with a crane and other lifting equipment. The course aims to preserve the knowledge that people already possess. The following topics may be covered: Materials and Equipment Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and regulations Basic load calculations Certification, Inspection and Marking Safe use of materials Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: Rigging & Slinging for Riggers & Banksmen Refresher €545,-

The Gas Measurement training (Nogepa code 1.4) is intended for people who work at a mine installation and who are responsible for testing and measuring whether gas, oxygen and / or toxic substances are present. The participants learns in theory and in practice the use of gas measurement and detection equipment, the interpretation of the measurement data and taking the right actions. Intended for: Persons designated to carry out gas measurements. Objective: To train the delegate in the theory and practice of the operation and the use of gas measurement and detection equipment, the interpretation of the measured data and taking the correct actions. This Gas Measurement training contains: Gas measurement strategies.  Measurement principles, procedures and rules. Various types of measurement and detection apparatus. Interpret the measured data. State/advice about the correct follow-up actions. Advice regarding safety provisions and personal protective equipment. Enclosed spaces.

The course is intended for persons designated as coxswain of survival craft (conventional lifeboat/capsule of Free-fall lifeboat). The aim of the course is training of delegates in the preparation, launching and handling of a survival craft in use at an offshore mining installation.     Learning targets: Maintaining the survival craft in an operational condition. Contributing to/carrying out drills and reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft and navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Planning: There are different opportunities for this training. We ask you to contact STC-KNRM by phone to book this training.

Now also available at STC-KNRM the OPITO E-BOSIET (Digital Delivery BOSIET) The OPITO BOSIET can also be followed through e-learning. With the OPITO E-BOSIET you train for only 1 day at our training center in opposition to 3 days. All theory you learn at home through E-learning during an average 8-16 hour program. The advantages of the E-BOSIET (Digital Delivery BOSIET): Save 2 days in time and hotel costs E-learning can be done at your own pace Determine the moment and location of learning yourself, "learn anywhere at anytime" Smaller group during the practice implementation of 1 day at the training center (maximum 8 participants) The E-BOSIET is offered on request Training times: We expect the participants at 07.45 on the training day. All training days will not end later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. On request we can organize this training in a different language for groups and if necessary with an interpreter. Additional Training: The following trainings can be booked in addition to the E- BOSIET course: ·        Compressed Air Emergency Breathing System (CA-EBS) – OPITO and NOGEPA ·        Crew Basket Training ·        H2S Training  NOGEPA Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. More information You can always contact one of our employees via info@stc-knrm.nl  or +31 10 428 38 60.

The Basic Offshore Safety Introduction and Emergency Training (BOSIET 0.5a + NOG- supplement) is a three-day training intended for employees working in the offshore sector. The aim of this training is to provide knowledge to offshore personnel about basic safety on platforms, survival at sea and providing (basic) first aid. The 0.5a BOSIET + NOG- supplement is OPITO and NOGEPA approved, NOG accepted and is valid worldwide. The certificate is valid for 4 years. Within 4 years the certificate has to be refreshed by doing a 0.5b/ FOET training. This Bosiet training includes: Safety induction; Fire fighting; First aid; Hypothermia; Helicopter safety/ HUET + EBS; Lifeboat Theory and Practice; Survival Theory and Practice; Norwegian escape Chute. Planning: Are you interested in this training? Please use the "Book Now" button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. On request we can organize this training in a different language for groups and if necessary with an interpreter. Additional Training: The following trainings can be booked in addition to the 0.5A BOSIET course: Compressed Air Emergency Breathing system (CA-EBS) – OPITO and NOGEPA Crew Basket Training H2S Training  NOGEPA Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself.

The Further Offshore Emergency Training (0.5a / FOET) is a one day refresher training. This course is designed for offshore personnel whose 0.5a / BOSIET certificate is about to expire. During this training offshore personnell refresh their knowledge and skills concerning survival techniques, medical knowledge and survival at sea. The FOET Training must be followed before the expiration date of the old BOSIET/ FOET certificate. This FOET training contains: Safety induction; Fire fighting; First aid / hypothermia; Helicopter safety/ HUET + EBS; Norwegian escape Chute. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. If you schedule the FOET training within three months before the expiration of your old certificate, the new expiry date is based on the expiration date of your old certificate. If you schedule the training prior those 3 months before the expiry date of your old certificate, the new expiry date is based on the date of participation. Training times: We expect the participants at 07.45 on this training day, training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is in English. On request we can organize this training in a different language for groups and if necessary with an interpreter. Additional Training: The following trainings can be booked in addition to the FOET course: Compressed Air Emergency Breathing System (CA EBS) – Opito and Nogepa Crew Basket Training H2S Training – Nogepa Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself.

The HUET, Helicopter Underwater Escape Training is a one-day training specifically designed for offshore staff and seafarers who regularly travel to and from their workplace using a helicopter. The goal of training of is in what way to travel safely and how to appropriately respond in the event of an emergency. This course is part of the BOSIET training, but we also offer this training to as 'separate' training.   This HUET training contains: Helicopter Safety; EBS (Emergency Breathing Systems, not to be confused with CA EBS); Ensure delegates are able to demonstrate in a simulated environment that they can use the safety equipment; Follow procedures in preparing for and during helicopter emergencies – with particular focus on escaping from a helicopter following ditching. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. On request we can organize this training in a different language for groups and if necessary with an interpreter. Additional Training: The following additional trainings can be booked in addition to the HUET course: Compressed air emergency breathing system (CA EBS) – Opito and Nogepa H2S - Nogepa Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a Nogepa medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself.

The Compressed Air Emergency Breathing System (CA-EBS) training is a result of the CAA Report (CAP 1145), developed for passengers in the UK sector whom travel by helicopter to and from an offshore installation or schip. Starting from September 2014 this training is mandatory for the UK sector and by May 1, 2015 this training is also mandatory in the Netherlands. The aims and objectives of the training are to ensure that the delegate gains the required knowledge and understanding of the particular hazards and properties of a CA EBS  and appropriate practical emergency response. The training is OPITO and NOGEPA approved. This CA-EBS training can also be booked as an "On Board" training via STC-KNRM at 0800-1412  This CA-EBS training contains: The fundamental differences between re-breather and compressed air systems (technology and use); The rationale and use of compressed air emergency breathing systems in helicopter emergency situations; The hazards associated with compressed air emergency breathing systems. To successfully complete this training, delegates must be able to demonstrate: A pre-flight inspection of the life jacket and CA-EBS; Donning the life jacket with CA-EBS correctly, including ‘buddy check’; Emergency deployment in a dry environment. Planning: This training can also be booked as an "On Board" training via STC-KNRM at 0800-1412  Training times: This training is given in addition to BOSIET, FOET or HUET training and therefore starting times may vary. Language: The training is in English. On request, we can organize this training in a different language for groups  and if necessary with an interpreter. Additional services: The following additionals can be booked in addition to the CA-EBS course: NOGEPA medical approval Personal Safety Logbook H2S Training – NOGEPA If both CA-EBS and H2S are booked following a FOET or HUET, one of the additional courses will be moved to a subsequent day. Additional information Delegates must possess a valid BOSIET, FOET or HUET certificate prior to attending the Compressed Air Breathing System (CA-EBS) Initial deployment Training program.

During the S-cape evacuation system, the student teaches the theory and practice of using the S-cape evacuation system. Under well-simulated conditions in our pool where reality is approached, the student will master the system. This allows the student to descend safely downwards with the S-cape evacuation system. This course is for anyone interested, working on an offshore installation where the S-cape evacuation system is available. Theory of S cape evacuation system The operation of S cape Evacuation system Storage offshore Making the S cape Evacuation system ready for use Practice descending using the S cape Evacuation system Practice descending in a rescue fleet using the S cape Evacuation system Planning and timings: This training can be combined with the BOSIET / FOET or HUET, in which the timings may vary. Language: The training is given in English or Dutch. On request, the training for groups can be organized in another language with the use of an interpreter.

IMIST stands for International Minimum Safety Safety Training and is an OPITO standard that supports the global oil and gas industry to achieve safety initiative targets. The IMIST e-learning programme has been developed to provide a new global standard for Health and Safety training, which will provide a comprehensive and consistent level of training across the world and enhance workforce safety and compliance. The IMIST standard ensures that workers have the necessary safety awareness and training to reduce risk and ultimately reduce the number of incidents. The IMIST standard ensures that the employee has the necessary security awareness and training to reduce the risk and ultimately reduce the number of accidents. The IMIST certificate is valid for 4 years. The e-learning and the exam are available in the following 12 languages: American and British English, Arabic, Hindi, Malaysian, French, Vietnamese, Thai, Indonesian, Russian, Kazakh and Danish. IMIST starts with an introduction that assesses knowledge of oil and gas industry employees about safety, based on various questions. The given answers are evaluated, after which a unique course for the participant is compiled. Based on the incorrect answered questions, an e-learning is compiled. Each participant is pursuing a special knowledge-based e-learning. The topics that are answered incorrectly are dealt with again, until the participant answers all questions correctly. Do you want to organize this e-learning for a team of employees at the location of your choice? Please contact us for the possibilities!

You can now also get your first aid Red Cross certificate at STC-KNRM! From unconsciousness to swallowing and from burning injuries to poisoning; Make sure you know what you need and practice all skills during our first aid course. Reanimation and use of the AED are also part of this course. Content Duration 8 hours online preparation and 4 hours classroom Save time by exercising online with the theory. Knowledge tests and clear videos make this online theory anything but boring. Practical exercises will be conducted in the  classroom with your colleagues Learning objectives and subjects To ensure the safety of a casualty to assess the condition, to alert emergency services and to provide  first aid to: Cardiac arrest: Resuscitation and use of an Automatic External Defibrillator (AED) Consciousness, choking Burns, skin wounds, bleeding, nose bleeding Head injury, nerve and vertebral injury Poisoning Pain in the chest, stroke Bone injuries, muscles and joints Conditions E-learning module: 1 year unlimited access to the online learning environment. As a result,  proof of participation (also admission ticket to the classroom course) Classical session: A European recognized Red Cross certificate (two years valid) A course folder with all subjects of this course Planning Are you interested in this training? Use the "book direct" button to view the schedule and book the training. Timing Yhe participants are expected to register at 08.00, the training is from 08.30-12.30 Language The training is given in English or Dutch

This 3-day practical Banksman offshore training is specifically designed for operational personnel on ships and/or oil platforms involved in hoisting operations. The purpose of this Banksman training is for participants to perform hoisting operations safely, responsibly and efficiently in cooperation with the crane operator. This certificate within the (petro) chemical industry in the Netherlands for an exemption for the "SOG BVL and VVL-H 'licenses and can be followed instead of these courses. This training consists of a combination of theory instruction, hands-on exercises and practical exercises with the crane and other hoisting equipment. The following topics are covered. Materials and Equipment ( mong others Fibre Ropes, Fibre Slings, Wire Ropes, Slings, DNV 2.7-1 container, Shackles, Chains, Hoists and Winches, Lifting Beams and Spreader Bars, Sheave Blocks, ROV Equipment) Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and Regulations Basic load calculations Certification, Inspection and Marking Safe use of materials Course format This Banksman Training consists of three consecutive days instruction from 08.00 to 16.30 for groups up to 8 participants. Both the theoretical and the practical part will be closed with a test. Certificate Participants who pass the theoretical and practical exam receive a Banksman NOGEPA 1.9A certificate. This certificate is valid for 4 years. Language The training is performed in English. In the case of Dutch speaking groups the instruction can be provided in the Dutch language, but training materials and examinations are in English. Location The training can be held at the STC-KNRM Training Centre in Rotterdam where all necessary facilities are available. On request we can also organize this training at other locations around the world, for example close to a project. Prerequisite There are no specific prerequisites for this course. If partcipants need to work Offshore, a valid Offshore medical exam is oblgated. Price The price is € €995,-- (inclusive registration fee) per participant. This price includes all training materials, the theoretical and practical exam and lunch, coffee and tea. Not included in the price are: Transport to and from possibly selected hotels for € 15, - per day.. 21% VAT. All prices exclude VAT.

This one-day practical training is intended for individuals and / or companies that are engaged in maintenance and fitting end connections (sockets) to steel cables. In this course the delegates will be trained how to carry out socketing in a correct way by using safe working practices. This Socket Termination Course contents: Different kind of connections and the use of these Required tools and resources Methods and procedures Preperation - What measurements should be taken and how Mixing and pouring resin Choosing the right method and procedure to fit the conections. After a short theoretical instruction this course focuses mainly on practical excercices. The theoretical part is concluded with a written test and practical exam that consists of a self-made socket. The practical part is executed at Franklin Offshore. This location is within walking distance of our training centre. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: Socket Termination Course €525,-

This 3-day theoretical and practical Rigging & Slinging training is specifically developed for the operational staff (Riggers & Banksman) working on board of Craneships and Oil & Gas Platforms. All aspects of Rigging, Slinging and Mooring are covered. The aim of the training is to provide the participants with the tools and knowledge that will increase both the safety and the efficiency of their work on board. This Rigging & Slinging Training consists of 3 consecutive days of theoretical and practical lessons. The training concludes with a written and practical exam. This Rigging & Slinging voor Riggers & Banksmen training contents: Materials and Equipment ( among others Fibre Ropes, Fibre Slings, Wire Ropes, Slings, DNV 2.7-1 container, Shackles, Chains, Hoists and Winches, Lifting Beams and Spreader Bars, Sheave Blocks, ROV Equipment) Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and Regulations Basic load calculations Certification, Inspection and Marking Safe use of materials. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: Rigging & Slinging for Riggers & Banksmen €1245,-

This H2S (Nogepa 0.8) is intended for persons working anywhere where hydrogen sulphide gas can be expected or has been found. The aim of this training is to inform the delegates on the health and safety issues related to hazards and risks of hydrogen sulphide gas and to equip them with the basic emergency response knowledge and skill. This H2S training contents: Knowledge of the properties and hazards of H2S; Knowledge of working activities on a H2S location; Knowledge of the necessary layout on an H2S location; Handling, use and restrictions of the specific compulsory personal protective equipment; Handling, use and restrictions of personal detection/alarm equipment; Escape procedures in case of an H2S alarm; First aid in case of H2S victims; Knowledge of H2S rules in the Working Condition Act (Arbowet). Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in addition to BOSIET, FOET or HUET and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements.

This four-day basic training course is aimed at everyone who is designated to perform first aid tasks in a first aid organisation at a mining installation or a drilling platform. This training consists of theoretical instruction combined with practical excersises. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Offshore First Aid training contents: basic principles of rendering first aid; stop bleeding; simple wound treatment; immobilize fractures; first aid at shock; cardio-pulmonary reanimation; first aid for unconscious patients; immobilization of patients with suspected back and/or neck injury; first aid at drowning; first aid at hypothermia; personal hygiene before treating open wounds; preparations for transport of wounded/sick persons; use of first aid equipment, bandages and trauma scale; communication and radio medical advice; giving injections into a muscle on indication of a physician; operating an AED; keep medical administration up to date. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements Prices: Offshore First Aid €834,- (incl. registrationfee, excl. 21% VAT) Offshore First Aid Refresher €534,- (incl. registrationfee, excl. 21% VAT)

This two-day refresher course is aimed at everyone who is designated to perform first aid tasks in a first aid organisation at a mining installation or a drilling platform. This training consists of theoretical instruction combined with practical excersises. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Offshore First Aid Refresher training contents: basic principles of rendering first aid; stop bleeding; simple wound treatment; immobilize fractures; first aid at shock; cardio-pulmonary reanimation; first aid for unconscious patients; immobilization of patients with suspected back and/or neck injury; first aid at drowning; first aid at hypothermia; personal hygiene before treating open wounds; preparations for transport of wounded/sick persons; use of first aid equipment, bandages and trauma scale; communication and radio medical advice; giving injections into a muscle on indication of a physician; operating an AED; keep medical administration up to date. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 07.45 on the first training day. The following day starts at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate, delegates need to be in the possession of a valid “Oranje Kruis Certificaat” or a valid Nogepa 2.2A / 2.2B certificate. Prices: Offshore First Aid Refresher €534,- (incl. registrationfee, excl. 21% VAT) Offshore First Aid €834,- (incl. registrationfee, excl. 21% VAT)

The instruction is a short practice-based instruction. The AED can save lives and it is of importance that staff has knowledge concerning heart failure and the use of an AED. During the instruction the participants practice with an trainingsdevice. This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. This training contents: Why perform CPR with an AED Techniques of the AED Use of the AED Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in several occasions and therefor training times may vary. Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional information For groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option).

The Crew Basket training aims to increase the awareness of safety and become familiar with the precautions in the field of transporting personnel between ships and platforms. This training can be booked as a supplement training for BOSIET, FOET or HUET, this option will apear on the bookingform. This Crew basket training contents: Points of Attention Awareness of crew basket procedures Conditions and requirements Inspection before each use Responsibilities Transfers Planning: This Crew Basket training can be booked as a supplement training for Bosiet, FOET or HUET, this option will apear on the bookingform. Training times: This training is given in addition to BOSIET, FOET or HUET and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements.

This training is intended for employees who already have obtained a BOSIET or FOET certificate, but who have not yet followed the NOG supplement for Norwegian waters. Subjects of this training are the Norwegian suit and the Norwegian Sky Escape system. At our training centre the NOG supplement is always a part of our BOSIET and FOET training. Content: Norwegian suit Norwegian Sky Escape System Schedule: This AED training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Language: The training can be given in English or Dutch. On request we can organize this training in a different language for groups  and if necessary with an interpreter.

Occasionally a visit may be paid to an offshore mining installation by a Corporate, Government, or other Officials.In order to safeguard the person it is important that he/she receives basic instructions and acquires a sufficient level of understanding of circumstances and hazards on an offshore mining installation. Sufficient basic knowledge of emergency response and selfrescue actions, while travelling to and from the installation by helicopter is also required. A visit to an installation is only allowed with this training under the following conditions: The visitor will not participate in any operational activity on board of the installation; During the visit the visitor shall be under guidance of a qualified and instructed crewmember. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This Limited Offshore Safety Introduction and Emergency Response Training contents: SAFETY INTRODUCTION Minimum knowledge concerning offshore hazards on board of an offshore mining installation; The use of personal protective equipment; Self-rescue techniques, use of smoke hood, and group escape techniques. HELICOPTER SAFETY (theory) Explanation and demonstration of helicopter transit/immersion suit and aviation life jacket, emergency equipment, and emergency exits; Preparation to take for an emergency landing SURVIVAL AT SEA Donning of a life jacket. Individual and group survival techniques and rescue techniques; Use of helicopter sling and position during hoisting. HUET Module (exercises) Use of personal protective equipment (immersion/helicopter transit suit, life jacket, etc.); Inflating a life jacket in the water; Deploying and use of a spray hood; Use of helicopter life raft; EBS (Emergency Breathing System) familiarization; Abandoning helicopter in various situations: Floating on the water, carrying out a dry evacuation via the emergency exit to a helicopter life raft; Upright under water without EBS – escaping through a window opening; Upright under water with EBS – escaping with operating a push out window; Capsized under water with EBS – escaping with operating a push out window, inflating a lifejacket, deploying spray hood, carrying out in water procedures; Boarding a helicopter life raft from the water; Being rescued by a helicopter sling. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 16.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid offshore medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants on our training facilities. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Prices Limited Offshore Safety Training €525,- OPITO registration €45,- (Optional) CA-EBS €75,- (Optional) Personal Safety Logbook €10,- (Optional) NOGEPA medical approval + shoulder measurement €180,- (Optional) Shoulder measurement €45,- (Optional) NOGEPA, Norwegian medical approval + shoulder measurement €200,-  

Each offshore mining installation which is manned, either permanently or temporarily, is provided with one or more survival craft, which allow crew on board to abandon the installation in case of emergency. The survival craft can be either of the conventional type, i.e. a lifeboat or capsule lowered by falls, or a lifeboat of the free-fall type. Training shall be provided to those who are designated as coxswain(s) handling the survival craft. In some cases the survival craft is used as a rescue craft (Man Overboard Boat). In that case it is useful to combine this course with the Coxswain Man Overboard Boat. Maintaining the survival craft in an operational condition. Contributing to/carrying out drills. Reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft. Navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Note: Depending on the duration of the course, the Conventional lifeboat/capsule as well as the Free-fall lifeboat or the whole range will be included in the teaching programme.   Basic course: 3 days, when taken in combination with course 2.3 (Coxswain Man Overboard Boat, it shall be 4 days. Refresher course: The duration of the refresher course is as follows: 1. One (1) day when the programme either includes the Conventional lifeboat/capsule, or only the Free-fall system. 2. One and a half (1½) days when the programme includes both the conventional lifeboat/capsule as well as the free-fall system. Remark 1: For those persons who have taken the basic and/or refresher course in only one type e.g. either 2.7aC or 2.7bC, and subsequently are faced with another type e.g. free-fall system, are allowed to enroll in the refresher course of the 2.7bF which will take 1 day, or 1½ when faced with both types. This will avoid to re-doing the common part of both the basic 2.7aC and 2.7aF. Remark 2: An STCW-95 proficiency in survival crafts other than fast rescue boats certificate can be considered as replacement training if the date of issue is within 2 years. Condition for participation: Offshore Medical certificate.

Each offshore mining installation which is manned, either permanently or temporarily, is provided with one or more survival craft, which allow crew on board to abandon the installation in case of emergency. The survival craft can be either of the conventional type, i.e. a lifeboat or capsule lowered by falls, or a lifeboat of the free-fall type. Training shall be provided to those who are designated as coxswain(s) handling the survival craft. In some cases the survival craft is used as a rescue craft (Man Overboard Boat). In that case it is useful to combine this course with the Coxswain Man Overboard Boat. .mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}body {min-height: 150px} Maintaining the survival craft in an operational condition. Contributing to/carrying out drills. Reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft. Navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Note: Depending on the duration of the course, the Conventional lifeboat/capsule as well as the Free-fall lifeboat or the whole range will be included in the teaching programme.   Basic course: 3 days, when taken in combination with course 2.3 (Coxswain Man Overboard Boat, it shall be 4 days. Refresher course: The duration of the refresher course is as follows: 1. One (1) day when the programme either includes the Conventional lifeboat/capsule, or only the Free-fall system. 2. One and a half (1½) days when the programme includes both the conventional lifeboat/capsule as well as the free-fall system. Remark 1: For those persons who have taken the basic and/or refresher course in only one type e.g. either 2.7aC or 2.7bC, and subsequently are faced with another type e.g. free-fall system, are allowed to enroll in the refresher course of the 2.7bF which will take 1 day, or 1½ when faced with both types. This will avoid to re-doing the common part of both the basic 2.7aC and 2.7aF. Remark 2: An STCW-95 proficiency in survival crafts other than fast rescue boats certificate can be considered as replacement training if the date of issue is within 2 years. Condition for participation: Offshore Medical certificate.

Each offshore mining installation which is manned, either permanently or temporarily, is provided with one or more survival craft, which allow crew on board to abandon the installation in case of emergency. The survival craft can be either of the conventional type, i.e. a lifeboat or capsule lowered by falls, or a lifeboat of the free-fall type. Training shall be provided to those who are designated as coxswain(s) handling the survival craft. In some cases the survival craft is used as a rescue craft (Man Overboard Boat). In that case it is useful to combine this course with the Coxswain Man Overboard Boat. Maintaining the survival craft in an operational condition. Contributing to/carrying out drills. Reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft. Navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Note: Depending on the duration of the course, the Conventional lifeboat/capsule as well as the Free-fall lifeboat or the whole range will be included in the teaching programme.   Basic course: 3 days, when taken in combination with course 2.3 (Coxswain Man Overboard Boat, it shall be 4 days. Refresher course: The duration of the refresher course is as follows: 1. One (1) day when the programme either includes the Conventional lifeboat/capsule, or only the Free-fall system. 2. One and a half (1½) days when the programme includes both the conventional lifeboat/capsule as well as the free-fall system. Remark 1: For those persons who have taken the basic and/or refresher course in only one type e.g. either 2.7aC or 2.7bC, and subsequently are faced with another type e.g. free-fall system, are allowed to enroll in the refresher course of the 2.7bF which will take 1 day, or 1½ when faced with both types. This will avoid to re-doing the common part of both the basic 2.7aC and 2.7aF. Remark 2: An STCW-95 proficiency in survival crafts other than fast rescue boats certificate can be considered as replacement training if the date of issue is within 2 years. Condition for participation: Offshore Medical certificate.

Each offshore mining installation which is manned, either permanently or temporarily, is provided with one or more survival craft, which allow crew on board to abandon the installation in case of emergency. The survival craft can be either of the conventional type, i.e. a lifeboat or capsule lowered by falls, or a lifeboat of the free-fall type. Training shall be provided to those who are designated as coxswain(s) handling the survival craft. In some cases the survival craft is used as a rescue craft (Man Overboard Boat). In that case it is useful to combine this course with the Coxswain Man Overboard Boat. Maintaining the survival craft in an operational condition. Contributing to/carrying out drills. Reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft. Navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Note: Depending on the duration of the course, the Conventional lifeboat/capsule as well as the Free-fall lifeboat or the whole range will be included in the teaching programme.   Basic course: 3 days, when taken in combination with course 2.3 (Coxswain Man Overboard Boat, it shall be 4 days. Refresher course: The duration of the refresher course is as follows: 1. One (1) day when the programme either includes the Conventional lifeboat/capsule, or only the Free-fall system. 2. One and a half (1½) days when the programme includes both the conventional lifeboat/capsule as well as the free-fall system. Remark 1: For those persons who have taken the basic and/or refresher course in only one type e.g. either 2.7aC or 2.7bC, and subsequently are faced with another type e.g. free-fall system, are allowed to enroll in the refresher course of the 2.7bF which will take 1 day, or 1½ when faced with both types. This will avoid to re-doing the common part of both the basic 2.7aC and 2.7aF. Remark 2: An STCW-95 proficiency in survival crafts other than fast rescue boats certificate can be considered as replacement training if the date of issue is within 2 years. Condition for participation: Offshore Medical certificate.

Each offshore mining installation which is manned, either permanently or temporarily, is provided with one or more survival craft, which allow crew on board to abandon the installation in case of emergency. The survival craft can be either of the conventional type, i.e. a lifeboat or capsule lowered by falls, or a lifeboat of the free-fall type. Training shall be provided to those who are designated as coxswain(s) handling the survival craft. In some cases the survival craft is used as a rescue craft (Man Overboard Boat). In that case it is useful to combine this course with the Coxswain Man Overboard Boat. Maintaining the survival craft in an operational condition. Contributing to/carrying out drills. Reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft. Navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Note: Depending on the duration of the course, the Conventional lifeboat/capsule as well as the Free-fall lifeboat or the whole range will be included in the teaching programme.   Basic course: 3 days, when taken in combination with course 2.3 (Coxswain Man Overboard Boat, it shall be 4 days. Refresher course: The duration of the refresher course is as follows: 1. One (1) day when the programme either includes the Conventional lifeboat/capsule, or only the Free-fall system. 2. One and a half (1½) days when the programme includes both the conventional lifeboat/capsule as well as the free-fall system. Remark 1: For those persons who have taken the basic and/or refresher course in only one type e.g. either 2.7aC or 2.7bC, and subsequently are faced with another type e.g. free-fall system, are allowed to enroll in the refresher course of the 2.7bF which will take 1 day, or 1½ when faced with both types. This will avoid to re-doing the common part of both the basic 2.7aC and 2.7aF. Remark 2: An STCW-95 proficiency in survival crafts other than fast rescue boats certificate can be considered as replacement training if the date of issue is within 2 years. Condition for participation: Offshore Medical certificate.

The course is intended for persons designated as coxswain of survival craft (conventional lifeboat/capsule of Free-fall lifeboat). The aim of the course is training of delegates in the preparation, launching and handling of a survival craft in use at an offshore mining installation.     Learning targets: Maintaining the survival craft in an operational condition. Contributing to/carrying out drills and reacting to alarms. Preparing the survival craft for launching. Boarding of passengers. Launching the survival craft and navigating the survival craft and moving to a safe zone. Communicating by radio and/or other means. Ensuring safety of passengers. Disembarking of passengers to a safe place. Planning: There are different opportunities for this training. We ask you to contact STC-KNRM by phone to book this training.

Medical First Aid   It is vital that passengers on board ships can provide medical first aid to fellow passengers. This is subject to legal requirements in the international STCW convention. Every officer is obliged to be in possession of a valid certificate. The Medical First Aid course teaches you to act quickly and efficiently in case of accidents and illness on board. Medical Care The international STCW Convention also imposes legal requirement on medical care provided on ships. the person responsible for medical care on board is obliged to be in possession of valid certificate. The course Medical Care teaches you to provide medical care to the sick and wounded on board. In this combination course all components are coverd as prescribes in STCW tables A-V / A-1 ( Medical First Aid) and 4-2 (Medical Care). the course has been certified by institute code NL007 by the Human Environment and transport Inspectorate (ILT). During this course, the instructor will deal with realistic situations that can occur on board. You learn to assess the situation and act accordingly. Guiding a medical evacuation is also part of the course program. The emphasis is on the practical skills of medical first aid and medical care on board. The following topics will be discussed during the course: • Recognizing the causes, extent and severity of accidents and illness on board • Providing fast medical first aid for accidents and illness • Providing medical care to the sick and wounded on board according to the guidelines of the national and international medical manuals on board • Recognizing changes in the patient's condition • Requesting external assistance and supervising a medical evacuation.   Lesson times: On the first day, participants are expected to be at 8 am for registration. The second training day starts at 08.15, both days end around 5 pm. Language: The training is given in Dutch. On request, the training for groups can be organized in a different language. It is also possible to hire an interpreter via STC-KNRM. Prices: Basic safety + Security awareness € 1160, - (Optional) Seafares medical examination € 160, - Particularities: Please deliver in advance: • A passport photo (name + birth date on the back note) • Certificate of physical inspection for seafaring • Excerpts personal register or copy of passport. In the case of a positive assessment of the final test, an officially (ILenT / Shipping approved) STCW'78 as amended certificate is issued and the sample booklet is stamped. It is important that you hand in the required documents on time otherwise we can hand over a certificate

In shipping, merchant shipping, water construction or fishing, you may have to deal with theft, piracy or terrorism. That is why it is important to be well informed about the security of your crew, cargo and ship. Your shipping company can appoint you as a Ship Security Officer (SSO). With this course you get the knowledge and skills on board to sail with confidence. The Ship Security officer (SSO) course teaches you to ensure both the security of the ship as well as the implementation and support of the ship security plan. The SSO in association with the CSO will ensure the safety awareness of the crew on board. This course has been certified by institute code NL007 by the Human Environment and Transport Inspectorate (ILT).   Target group: You are an officer on every type of seagoing vessel in merchant shipping, hydraulic engineering or fishing, including tankers, passenger ships, Ro-Ro's and dredgers and you are charged with the security organization on board a seagoing vessel greater than 500 GT / 750 kW, as prescribed in the ISPS. code and Solas XI-2. The two-day course STCW Ship Security Officer takes 2 days. After completion the participant receives a STCW (A-VI/5) certificate, which is valid for life. Course content: Maritime security threats and preventative measures Ship Security Assessments and Audits The creating of Ship Security Plans Ship and Port Facility security measures and arrangements Recognition of behavioural patterns of people likely to threaten security Detection of weapons, explosives and other dangerous substances Regular testing, calibration and effective use of security equipment and systems Knowledge of ISPS code At the end of the course: you ensure the security of the ship in an effective manner; you work more effectively as a manager in the field of ship security; you contribute to safety on the ship; you work together with the CSO (Company Security Officer) and the Security Officer of the Port Facility Security Officer on safety on the ship. Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.00 on the first training day. The following day starts at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is in English. On request we can organize this training for groups in a different language and if necessary with an private interpreter. Requirements for participation: guard officer (Marof, Stuurman or WTK) on ships> 500 GT / 750 kW good knowledge of the English language at least 18 years old sailing time of at least 12 months or a demonstrable knowledge in ship operations Please take the following to the training: Passport

This STCW training 'Proficiency in Fast Rescue Craft refresher (content in accordance with section A-V1 / 2 Table A-V1 / 2-2 STCW '78 as amended), is intended for seafarers who are assigned to staff and / or to control a Fast Rescue Craft. Participants receive both theoretical and practical training on steering a fast rescue craft on open water. This training is part of our standard offer, please contact STC-KNRM for a booking at 0031-10 428 38 60 This Proficiency in Fast Rescue Craft refresher training contains: Fast rescue craft introduction and theory Journey preparation and safety checks Slow and fast boat handling on inland and open waters Coming alongside a ship, steering in poor weather Man overboard (MOB) recovery exercise and assisting victim once on board IAMSAR search patterns Capsize exercise in swimming pool Practice at KNRM station, and on KNRM ships with both jet and propeller drive Navigation system, plotter and VHF radio operation Emergency beacons PLB, EPIRB, SART Training times: We expect the participants at 08.15 on the first training day. The second day starts at 08.30 and ends no later than 17.30, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Basis Safety Training (STCW) or a Basic Safety Training (STCW) Refresher certificaat, in combination with a  Proficiency in Survival Craft and Rescue Boats other than Fast Rescue Boats (PSCRB) or  PSCRB Refresher. Also a seafarers medical certificate or declaration of good health from their doctor is required. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Prices: Seafarers medical certificate  €160,-

The Basic Safety Training is for all who wish to work on board a seagoing vessel. The training consists of the Personal Survival Techniques, Elementary First Aid, Personal Safety and Social Responsibilities, and Fire Prevention and Fire Fighting modules. This Basic Safety Training (STCW) contains: Survival techniques; Fire safety and fire fighting; First aid in the event of an accident; Working safely; Social responsibilities The following practical lessons are given: Practising with personal and group life-saving equipment; Maintenance of safety materials; Fire drills with fire fighting equipment/compressed air and the use of the compulsory fire extinguishers; Practising emergency procedures; First aid and resuscitation. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. Specifics: Please bring the following items to the training: swimwear, Passport, ID or Drivers Licence, valid medical certificate and the Seamansbook. Prices: Basic Safety Training (STCW) €985,- Security Awareness €200,- Basic Safety Training +Security Awareness Combination price €1160,- (Optional) Seafarers medical certificate  €160,-

The Basic Safety Training (STCW) Refresher is for all who already have an Basic Safety STCW certificate and must take the compulsory refresher course (once every 5 years).The training consists of refreshing the Personal Survival Techniques, Elementary First Aid, Personal Safety and Social Responsibilities, and Fire Prevention and Fire Fighting modules. The objective of this course is to provide appropriate recurrent training or instruction to survive at sea in the event of ship abandonment as set out in STCW Code Table A-VI/1-4. This Basic Safety Training (STCW) Refresher contents: Personal safety and social responsibilities; Personal survival techniques; Fire prevention and fire fighting; Elementary first aid. Until January 1, 2017, seafarers may provide evidence of having mantained the minimum of competence in basic training by documenting 12 months of service within the last 5 years. After January 1, 2017, seafarers must provide evidence of maintaining the standards of competence in basic training every 5 years. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.15. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Basic Safety STCW as well as a seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. Specifics: Please bring the following items to the training: swimwear, seamansbook and Passport, ID or Driverslicence To be sent prior to starting the course: A valid Seafarers medical certificate (physical examination) A copy of the delegates passport A copy of the first page of the delegates seamansbook A copy of the delegates old Basic Safety Training (STCW) certificate   It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Basic Safety Training (STCW) Refresher €575,- Basic Safety Training (STCW) €985,- Security Awareness €200,- Basic Safety Training +Security Awareness Combination price €1160,- (Optional) seafarers medical certificate €160,-

The Security Awareness training is intended to provide the knowledge required to enable personnel without designated security duties to enhance ship security en abling them to contribute to the enhancement of maritime security through heightened awareness and the ability to recognize security threats and to respond appropriately. This applies to all seafarers. This Security Awareness training contents: he meaning and the consequential requirements of the different security levels; knowledge of emergency procedures and contingency plans; recognition and detection of weapons, dangerous substances and devices; recognition, on a non-discriminatory basis of characteristics and behavioural patterns of persons who are likely to threaten security; techniques used to circumvent security measures. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 12.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Additional training: The following additional training can be booked in addition to the Security Awareness course: Basic Safety Training (STCW) Requirements for participation: In order to participate to the training, participants need to have a valid seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Specifics: It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Security Awareness €200,- Basic Safety Training (STCW) €985,- Basic Safety Training +Security Awareness Combination price €1160,- (Optional) seafarers medical certificate + shoulder measurement €160,-

This STCW training 'Proficiency in Fast Rescue Craft (content in accordance with section A-V1 / 2 Table A-V1 / 2-2 STCW '78 as amended), is intended for seafarers who are assigned to staff and / or to control a Fast Rescue Craft. Participants receive both theoretical and practical training on steering a fast rescue craft on open water. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412.     This Proficiency in Fast Rescue Craft training contains: Fast rescue craft introduction and theory Journey preparation and safety checks Slow and fast boat handling on inland and open waters Coming alongside a ship, steering in poor weather Man overboard (MOB) recovery exercise and assisting victim once on board IAMSAR search patterns Capsize exercise in swimming pool Practice at KNRM station, and on KNRM ships with both jet and propeller drive Navigation system, plotter and VHF radio operation Emergency beacons PLB, EPIRB, SART Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 08.15 on the first training day this day also has an evening lassion that lasts untill 21.00 hours. The following day starts at 08.30 and ends no later than 17.30, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Basis Safety Training (STCW) or a Basic Safety Training (STCW) Refresher certificaat, in combination with a  Proficiency in Survival Craft and Rescue Boats other than Fast Rescue Boats (PSCRB) or  PSCRB Refresher. Also a seafarers medical certificate or declaration of good health from their doctor is required. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Prices: Proficiency in Fast Rescue Craft €1295,- Proficiency in Fast Rescue Craft refresher €675,- Basic Safety + Security Awareness €1160,- (Optional) seafarers medical certificate + Shoulder measurement €160,-

The instruction is a short practice-based instruction. The AED can save lives and it is of importance that staff has knowledge concerning heart failure and the use of an AED. During the instruction the participants practice with an trainingsdevice. This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. This training contents: Why perform CPR with an AED Techniques of the AED Use of the AED Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in several occasions and therefor training times may vary. Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional information For groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option).

This module Sea Survival is part of the STCW Basic Safety Training. Some companies choose their staff only to follow this training. We don't have this course scheduled on a regular basis, but we can plan this course for you upon request. In this course the following topics are covered: The dangers and symptoms of hypothermia; benefits and limitations of the various Lifejackets used in the industry; Using various Life Jackets Basics of survival at sea, individually and in groups. Planning: We can plan this course on request. In both cases we ask you to contact STC-KNRM for booking this course. Language: The training is given in English or Durth. We can organize this training in a different language for groups on request and if necessary with an interpreter. Requirements for participation: In order to participate in this training, participants need a valid Seafarers medical examination.

The Medical First Aid on board and Medical Care on board courses are being introduced for all types of ships in the merchant, fisheries and sailing ship sectors. The captain and the persons responsible for medical care on board must be in the possession of both certificates (Medical First Aid and Medical Care). In a number of cases a medical first aid on board certificate will be sufficient, for example on ships navigating near the Dutch coast in a navigation area extending to the Dutch territorial sea.  This is because onshore support can be available. This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This training is provided by STC B.V. This Medical First Aid course contents: first aid kit; toxicological hazards and injuries caused by chemicals; approaching and examining victims and patients in accordance with the GHS guidelines or equivalent; contact with the Radio Medical Service; neck and spinal injuries; thermal wounds and injuries; fractures, dislocations, contusions and sprains; medical care of rescued persons; pharmacology; sterile techniques; cardiac arrest, drowning and asphyxia. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 08.15 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid STCW Basic Safety training as well as a Seafarers medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Specifics: To be brought to the lessons: Seamansbook. To be sent prior to starting the course: Passport photograph (with name and date of birth written on the back) Copy of Basic Safety Training Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Medical First Aid €540,- Medical Care €885,- Basic Safety + Security Awareness €1160,- (Optioneel) Zeevaart medische keuring+ schoudermeting €160,-

The Medical Care on board and Medical First Aid on board courses are being introduced for all types of ships in the merchant, fisheries and sailing ship sectors. The captain and the persons responsible for medical care on board must be in the possession of both certificates (Medical First Aid and Medical Care). This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. This training is provided by STC B.V. The Medical Care course contents: Medical care of victims with: head, neck and spinal injuries; ear, eye, nose and throat injuries and diseases; internal and external bleeding; burns, scalds and frostbite; fractures, dislocations, contusions and sprains; wounds, wound healing and care of bleeding; options for pain relief and administration; sewing techniques; acute abdominal complaints; minor surgical treatment; dressing techniques. General principles of nursing and nursing care. Diseases, including: medical condition and acute disorders of vital functions; sexually transmitted diseases; tropical and infectious diseases; alcohol and drug abuse; dental care; gynaecology, pregnancy and childbirth; medical care of rescued persons; general hygiene; death at sea. Disease prevention: disinfection, disinfection station, disinfestation; vaccinations. Medical records: keeping medical records; national and international regulations. Onshore assistance and support: RMA; transportation of the ill and injured, including helicopter evacuation; medical care of sick seafarers in cooperation with port health authorities relating to quarantine measures. Planning: This training is part of our standard offer, please contact STC-KNRM for a booking at 0800 - 1412. Training times: We expect the participants at 08.15 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid STCW Basic Safety Training and have a valid Medical First Aid certificate (MFA). Also a Seafarers medical certificate or declaration of good health from their doctor. We can arrange a NOGEPA medical examination for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Specifics: To be brought to the lessons: Seamansbook. To be sent prior to starting the course: Passport photograph (with name and date of birth written on the back) Copy of Basic Safety Training + Medical First Aid Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Medical Care €885,- Medical First Aid €540,- Basic Safety + Security Awareness €1160,- (Optioneel) Zeevaart medische keuring+ schoudermeting €160,-

Combi Basic Safety/Adv. Fire Fighting/Prof. in Survival Craft Refresher is for seafarers with a : - Basic Training certificate - Advanced Fire Fighting certificate - Proficiency in Survival Craft and Rescue Boats Other Than Fast Rescue Boats certificate Whom must take the compulsory refresher course (once every 5 years). This training is provided by STC B.V. This Combi Basic Safety/Adv. Fire Fighting/Prof. in Survival Craft Refresher training STCW section A VI-1, A VI-2-1 & A VI-3 contents: Personnel Safety and Social Responsibility theory and practice; Elementary First Aid theory and practice; Survival Techniques theory and practice; Fire Fighting theory and practice.   Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.15 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Participants also need to have valid : - Basic Training certificate - Advanced Fire Fighting certificate - Proficiency in Survival Craft and Rescue Boats Other Than Fast Rescue Boats certificate Specifics: For the certificate to remain valid, participants must have one year of sailing time during a period of five consecutive years. To be brought to the lessons: swimwear, overalls or old clothing and waterproof clothing. To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. Copies of all 3 valid certificates It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Combi Basic Safety/Adv. Fire Fighting/Prof. in Survival Craft Refresher (SCOM2) € 1265,- Combi Basic Safety/Prof. in Survival Craft Refresher (SCOM1) €1005,- Combi Basic Safety/Adv. Fire Fighting (SCOM3) € 1005,- (Optional) seafarers medical certificate + shoulder measurement €160,-

he Combi Basic Safety/Adv. Fire Fighting Refresher course is for seafarers with the Basic Training and Advanced Firefighting certificate who must take the compulsory refresher course (once every 5 years). This training is provided by STC B.V. This Combi Basic Safety/Adv. Fire Fighting Refresher training contents: Personnel Safety and Social Responsibility theory and practice; Elementary First Aid theory and practice; Firefighting theory and practice. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.15 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Participants also need to have valid : - Basic Training certificate - Advanced Fire Fighting certificate Specifics: For the certificate to remain valid, participants must have one year of sailing time during a period of five consecutive years. To be brought to the lessons: swimwear, overalls or old clothing and waterproof clothing. To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. Copies of both valid certificates It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Combi Basic Safety/Adv. Fire Fighting (SCOM3) € 1005,- Combi Basic Safety/Prof. in Survival Craft Refresher (SCOM1) €1005,- Combi Basic Safety/Adv. Fire Fighting/Prof. in Survival Craft Refresher (SCOM2) € 1265,- (Optional) seafarers medical certificate + shoulder measurement €160,-

The Combi Basic Safety/Proficiency in Survival Craft Refresher course is for seafarers with a Basic Training certificate and a Proficiency in Survival Craft Other Than Fast Rescue Boats certificate who must take the compulsory refresher course (once every 5 years). This training is provided by STC B.V. This Combi Basic Safety/Proficiency in Survival Craft Refresher Training STCW section A VI-1 & A VI-2-1 contents: Personnel Safety and Social Responsibility theory and practice. Elementary First Aid theory and practice. Survival Techniques theory and practice. Planning: This training is executed by STC BV. The course schedule can be found on www.stc-bv.nl (Please select Maritime Shipping in the menu on the left) Training times: We expect the participants at 08.15 on the first training day. The following days start at 08.30. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The Combi Basic Safety/Proficiency in Survival Craft Refresher training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid seafarers medical certificate or declaration of good health from their doctor. We can arrange a seafarers medical certificate for the participants. On www.nogepa.nl you can find a certified doctor nearby to book the declaration of good health yourself. Participants also need to have valid : - Basic Training certificate - Proficiency in Survival Craft and Rescue Boats Other Than Fast Rescue Boats certificate Specifics: For the certificate to remain valid, participants must have one year of sailing time during a period of five consecutive years. To be brought to the lessons: swimwear, overalls or old clothing and waterproof clothing. To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. Copies of both valid certificates It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Combi Basic Safety/Proficiency in Survival Craft Refresher (SCOM1) €1005,- Combi Basic Safety/Adv. Fire Fighting/Prof. in Survival Craft Refresher (SCOM2) € 1265,- Combi Basic Safety/Adv. Fire Fighting (SCOM3) € 1005,- (Optional) seafarers medical certificate + shoulder measurement €160,-

The Advanced Fire Fighting course is for captains, chief officers and engineer officers in the shipping sector. This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl This Advanced Fire Fighting training contents: The division of tasks and responsibilities; Communication; Management (of the fire-fighting team and general leadership skills); Gathering information/assessing situations/taking decisions; Cooperating with the on-shore fire fighting organization during a fire on board; Fighting fires involving hazardous substances; Techniques for optimal ventilation control; The latest developments regarding fire fighting equipment and fire fighting techniques; Analysis of incidents involving fire on board ships; Practical exercises with specific attention given to general leadership, the management of a fire fighting team and the correct execution of procedures; Stability; Maintenance management of fire fighting systems and fire detection equipment. Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 08.30 on the first training day. The following days start at 09.00, all training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Basic Safety (STCW) certificate. Specifics: To be brought to the lessons: Valid seafarers medical certificate Blue Safetybook To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Copy of  valid Basic Safety (STCW) certificate Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Advanced fire fighting € 1310,- Advanced fire fighting Refresher €805,- Basic Safety Training (STCW) €985,- (Optional) seafarers medical certificate + shoulder measurement €160,-

The Advanced Fire Fighting Refresher course is for captains, chief officers and engineer officers in the shipping sectorwith the Advanced Fire Fighting certificate who must take the compulsory refresher course (once every 5 years). This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl   This Advanced Fire Fighting Refresher training contents: The division of tasks and responsibilities; Communication; Management (of the fire-fighting team and general leadership skills); Gathering information/assessing situations/taking decisions; Cooperating with the on-shore fire fighting organization during a fire on board; Fighting fires involving hazardous substances; Techniques for optimal ventilation control; The latest developments regarding fire fighting equipment and fire fighting techniques; Analysis of incidents involving fire on board ships; Practical exercises with specific attention given to general leadership, the management of a fire fighting team and the correct execution of procedures; Maintenance management of fire fighting systems and fire detection equipment. Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 08.30 on the first training day. The following day start at 09.00, all training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Advanced Fire Fighting certificate. Specifics: To be brought to the lessons: Valid seafarers medical certificate Blue Safetybook To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Copy of  valid Advanced Fire Fighting certificate Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Advanced fire fighting Refresher €805,- Advanced fire fighting € 1310,- Basic Safety Training (STCW) €985,- (Optional) seafarers medical certificate + shoulder measurement €160,-

The Proficiency in Survival Craft course is for crew members whose task it is to launch and operate lifeboats, life rafts and other rescue boats. There is a separate course for launching and operating fast rescue boats. This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl   The Proficiency in Survival Craft course contents: The division of tasks and responsibilities when abandoning ship; Preparing for abandoning ship and what to do when abandoning ship; Communication; Leadership; Practical exercises and manoeuvring a lifeboat; Cooperating with the on-shore fire fighting organization during a fire on board; The intention and use of life-saving appliances; The construction of life-saving appliances. Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 08.15 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Basic Safety (STCW) certificate as well as a Seafarers medical certificate. Specifics: To be brought to the lessons: Seamansbook. To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Proficiency in Survival Craft € 975,- Basic Safety + Security Awareness €1160,- (Optioneel) Zeevaart medische keuring+ schoudermeting €160,-

The Proficiency in Survival Craft Refresher course is for crew members whose task it is to launch and operate lifeboats, life rafts and other rescue boats (other than fast resque boats). The participants must take the compulsory refresher course once every 5 years. This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Crew members who are responsible gor launching and operating fast rescue boats need  to do the training Proficiency in Fast Rescue Crafts.     The Proficiency in Survival Craft Refresher course contents: The division of tasks and responsibilities when abandoning ship; Preparing for abandoning ship and what to do when abandoning ship; Communication; Leadership; Practical exercises and manoeuvring a lifeboat; Cooperating with the on-shore fire fighting organization during a fire on board; The intention and use of life-saving appliances; The construction of life-saving appliances. Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 08.15 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate to the training, participants need to have a valid Proficiency in Survival Craft certificate as well as an Seafarers medical certificate. Specifics: To be brought to the lessons: Seamansbook. To be sent prior to starting the course:  Passport photograph (with name and date of birth written on the back) Seagoing medical certificate (physical examination) Copy of the participant’s personal information from the municipal personal records database or an enlarged photocopy of their passport. It is important that we receive the required documents in time, otherwise it will not be possible for us to issue a certificate. Prices: Proficiency in Survival Craft Refresher € 455,- (Optioneel) Basic Safety + Security Awareness €1160,- (Optioneel) Zeevaart medische keuring+ schoudermeting €160,-

This 1-day practice-oriented Rigging & Slinging training (Refresher) is specially developed for operational personnel (riggers & banksman) who work on board of ships and / or on oil platforms. The purpose of this training is to retain the knowledge and skills that people have learned during the basic course and it ensures that your certificate is renewed. This training consists a combination of theory instruction, practice-oriented exercises and practice exercises with a crane and other lifting equipment. The course aims to preserve the knowledge that people already possess. The following topics may be covered: Materials and Equipment Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and regulations Basic load calculations Certification, Inspection and Marking Safe use of materials Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45. All training days end no later than 17.00, unless the participant attends additional training(s). Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: Rigging & Slinging for Riggers & Banksmen Refresher €545,-

Would you like to prepare for the VOL VCA exam at the moment that suits you? Then this VOL VCA e-learning is it for you. VCA VOL is intended for Operational Managers and Main Contractors. The e-learning for VOL VCA contains about 7 hours of study material. Do you master the curriculum? Please contact us to schedule the VCA exam at one of the many locations in the Netherlands. The e-learning for VOL VCA gives you access to 12 online modules, practice questions, reference, sample exams and extra documents such as a glossary, abbreviations list and exam development. This e-learning contains the following modules: Part A: Preparation, discussion and inspection • Regulation and safety rules • Safe working, consultation and inspections • Prevention Part B: Performing work • The workplace • Personal protective equipment (PBMs) • Work resources • Specific activities and circumstances Part C: Managing specific hazards • Dangerous substances • Electricity and radiation • Fire and explosion Part D: Managing incidents and emergency situations • Accidents • Emergency situations Cancellations must always be made by e-mail to info@stc-knrm.nl Following cancellation conditions apply: 1. Un-used return within 10 working days after purchase: no costs 2. Un-used return 10 working days after purchase or later: 100% costs 3. Used return: 100% costs.

Would you like to prepare for the Basic VCA exam at the moment that suits you? Then this Basic VCA e-learning is it for you. Basic VCA is intended for executive staff. The e-learning for Basic VCA contains about 6 hours of study material. Do you master the curriculum? Please contact us to schedule the VCA exam at one of the many locations in the Netherlands. The e-learning for VOL VCA gives you access to 12 online modules, practice questions, reference, sample exams and extra documents such as a glossary, abbreviations list and exam development. This e-learning contains the following modules: Part A: Preparation, discussion and inspection • Regulation and safety rules • Safe working, consultation and inspections • Prevention Part B: Performing work • The workplace • Personal protective equipment (PBMs) • Work resources • Specific activities and circumstances Part C: Managing specific hazards • Dangerous substances • Electricity and radiation • Fire and explosion Part D: Managing incidents and emergency situations • Accidents • Emergency situations Cancellations must always be made by e-mail to info@stc-knrm.nl Following cancellation conditions apply: 1. Un-used return within 10 working days after purchase: no costs 2. Un-used return 10 working days after purchase or later: 100% costs 3. Used return: 100% costs.

IMIST stands for International Minimum Safety Safety Training and is an OPITO standard that supports the global oil and gas industry to achieve safety initiative targets. The IMIST e-learning programme has been developed to provide a new global standard for Health and Safety training, which will provide a comprehensive and consistent level of training across the world and enhance workforce safety and compliance. The IMIST standard ensures that workers have the necessary safety awareness and training to reduce risk and ultimately reduce the number of incidents. The IMIST standard ensures that the employee has the necessary security awareness and training to reduce the risk and ultimately reduce the number of accidents. The IMIST certificate is valid for 4 years. The e-learning and the exam are available in the following 12 languages: American and British English, Arabic, Hindi, Malaysian, French, Vietnamese, Thai, Indonesian, Russian, Kazakh and Danish. IMIST starts with an introduction that assesses knowledge of oil and gas industry employees about safety, based on various questions. The given answers are evaluated, after which a unique course for the participant is compiled. Based on the incorrect answered questions, an e-learning is compiled. Each participant is pursuing a special knowledge-based e-learning. The topics that are answered incorrectly are dealt with again, until the participant answers all questions correctly. Do you want to organize this e-learning for a team of employees at the location of your choice? Please contact us for the possibilities!

You can now also get your first aid Red Cross certificate at STC-KNRM! From unconsciousness to swallowing and from burning injuries to poisoning; Make sure you know what you need and practice all skills during our first aid course. Reanimation and use of the AED are also part of this course. Content Duration 8 hours online preparation and 4 hours classroom Save time by exercising online with the theory. Knowledge tests and clear videos make this online theory anything but boring. Practical exercises will be conducted in the  classroom with your colleagues Learning objectives and subjects To ensure the safety of a casualty to assess the condition, to alert emergency services and to provide  first aid to: Cardiac arrest: Resuscitation and use of an Automatic External Defibrillator (AED) Consciousness, choking Burns, skin wounds, bleeding, nose bleeding Head injury, nerve and vertebral injury Poisoning Pain in the chest, stroke Bone injuries, muscles and joints Conditions E-learning module: 1 year unlimited access to the online learning environment. As a result,  proof of participation (also admission ticket to the classroom course) Classical session: A European recognized Red Cross certificate (two years valid) A course folder with all subjects of this course Planning Are you interested in this training? Use the "book direct" button to view the schedule and book the training. Timing Yhe participants are expected to register at 08.00, the training is from 08.30-12.30 Language The training is given in English or Dutch

This 3-day practical Banksman offshore training is specifically designed for operational personnel on ships and/or oil platforms involved in hoisting operations. The purpose of this Banksman training is for participants to perform hoisting operations safely, responsibly and efficiently in cooperation with the crane operator. This certificate within the (petro) chemical industry in the Netherlands for an exemption for the "SOG BVL and VVL-H 'licenses and can be followed instead of these courses. This training consists of a combination of theory instruction, hands-on exercises and practical exercises with the crane and other hoisting equipment. The following topics are covered. Materials and Equipment ( mong others Fibre Ropes, Fibre Slings, Wire Ropes, Slings, DNV 2.7-1 container, Shackles, Chains, Hoists and Winches, Lifting Beams and Spreader Bars, Sheave Blocks, ROV Equipment) Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and Regulations Basic load calculations Certification, Inspection and Marking Safe use of materials Course format This Banksman Training consists of three consecutive days instruction from 08.00 to 16.30 for groups up to 8 participants. Both the theoretical and the practical part will be closed with a test. Certificate Participants who pass the theoretical and practical exam receive a Banksman NOGEPA 1.9A certificate. This certificate is valid for 4 years. Language The training is performed in English. In the case of Dutch speaking groups the instruction can be provided in the Dutch language, but training materials and examinations are in English. Location The training can be held at the STC-KNRM Training Centre in Rotterdam where all necessary facilities are available. On request we can also organize this training at other locations around the world, for example close to a project. Prerequisite There are no specific prerequisites for this course. If partcipants need to work Offshore, a valid Offshore medical exam is oblgated. Price The price is € €995,-- (inclusive registration fee) per participant. This price includes all training materials, the theoretical and practical exam and lunch, coffee and tea. Not included in the price are: Transport to and from possibly selected hotels for € 15, - per day.. 21% VAT. All prices exclude VAT.

This H2S (Nogepa 0.8) is intended for persons working anywhere where hydrogen sulphide gas can be expected or has been found. The aim of this training is to inform the delegates on the health and safety issues related to hazards and risks of hydrogen sulphide gas and to equip them with the basic emergency response knowledge and skill. This H2S training contents: Knowledge of the properties and hazards of H2S; Knowledge of working activities on a H2S location; Knowledge of the necessary layout on an H2S location; Handling, use and restrictions of the specific compulsory personal protective equipment; Handling, use and restrictions of personal detection/alarm equipment; Escape procedures in case of an H2S alarm; First aid in case of H2S victims; Knowledge of H2S rules in the Working Condition Act (Arbowet). Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in addition to BOSIET, FOET or HUET and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements.

This one-day course Basic Safety VCA (in English) is primarily intended for those, whose work requires the B-VCA diploma and who are participating in the exam for the first time. The students are being prepared for the B-VCA exam by an experienced instructor. Next to that they receive a clearly written text book that will help them to get to know the material. This training is provided by STC B.V. This VCA Basic training in English contents: Leglislation; Risk of accident; Hazardous substances; Fire hazard; Explosion hazard; Working in confined spaces; Common working safely; Working safely with electricity; Safely working with tools; Safely working with hoist and forklifts; Safely working at heights; Lifting, tripping, slipping and falling; Personal protective equipement. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 15.30 following the participant attend the written examination wich will take 1 hour. Language: The training is given in English. On request we can also organize this training for groups in Dutch, German, French, Portugese, Polish and Slowakian. If necessary the training can also be booked with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: VCA Basic €275,- VCA Superior €275,- VCA Basic exam only €115,- VCA Superior exam only €125,- Mentioned prices for this training are including: text book and written examination.

The exam Basic Safety VCA is a part of every STC-KNRM Basic Safety VCA course. It’s also possible to do the examination only. If you choose not to do the VCA course and want to study for the exam by yourself we refer you to the website of Pontifex to order a <a href="http://pontifexcertificatie.nl/books.html">textbook</a>. Basic VCA books are available in Dutch, English, German, Polish and Lithuanian. The exam VCA Basic Exam English consists of 40 multiple choice questions. 28 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 60 minutes. The exam will be taken by Pontifex Certification. For participants with language or reading difficulties there is the possibility to take a reading exam, this is not the same as an oral exam. Language: This VCA Basic Exam is in the English language but can also be booked in Dutch, German , French, Spanish, Italian, Polish, Slovakian, Romanian and Lithuanian. Do you wish to book this course in another language? Please select VCA Basic exam and choose your language. Location: Through our website you can book directly for Pontifex locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.

The 1-day course Basic Safety VCA (VCA-B) in Dutch is primarily intended for those, whose work requires the B-VCA diploma and who are participating in the exam for the first time. The students are being prepared for the B-VCA exam by an experienced instructor. Next to that they receive a clearly written text book that will help them to get to know the material. This training is provided by STC B.V. This VCA Basic Dutch contents: Leglislation Risk of accident Hazardous substances Fire hazard Explosion hazard Working in confined spaces Common working safely Working safely with electricity Safe working with tools Safe working with hoist and forklifts Safe working at heights Lifting, tripping, slipping and falling Personal protective equipement Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 15.30 following the participant attend the written examination wich will take 1 hour. Language: The training is given in Dutch. On request we can also organize this training for groups in English, German, French, Portugese, Polish and Slowakian. If necessary the training can also be booked with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: VCA Basic in Dutch €210,- VCA VOL in Dutch €210,- VCA Basic exam only in Dutch €59,- VCA VOL exam only in Dutch €75,- Mentioned prices for this training are including: text book and written examination.

The exam VCA Basic Exam Dutch is a part of every STC-KNRM Basic Safety VCA course. It’s also possible to do the examination only. If you choose not to do the VCA course and want to study for the exam by yourself we refer you to the website of Pontifex to order a textbook. Basic VCA books are available in Dutch, English, German, Polish and Lithuanian. The exam VCA Basic Exam Dutch consists of 40 multiple choice questions. 28 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 60 minutes. The exam will be taken by Pontifex Certification. For participants with language or reading difficulties there is the possibility to take a reading exam, this is not the same as an oral exam. Language: This VCA Basic Exam is in the Dutch language but can also be booked in Englisch, German , French, Spanish, Italian, Polish, Slovakian, Romanian and Lithuanian. Do you wish to book this course in another language? Please select VCA Basic exam and choose your language. Location: Through our website you can book directly for locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.  

The 1-day basic safety course VCA for Supervisors (VOL-VCA)is in English and is primarily intended for managers and team leaders who in this role need the VOL-VCA diploma. During the VOL-VCA course participants learn how to work safely (or delegate) and how people can be motivated to work safely and responsibly. Using the STC-KNRM VOL VCA textbook,  students are being prepared for VOL-VCA exam  by an experienced instructor, which is taken at the end of the course. This training is provided by STC B.V. This VCA Supervisor in English contents: Leglislation; Risk of accident; Hazardous substances; Fire hazard; Explosion hazard; Working in confined spaces; Common working safely; Working safely with electricity; Safely working with tools; Safely working with hoist and forklifts; Safely working at heights; Lifting, tripping, slipping and falling; Personal protective equipement. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.00 on this training day. Training ends no later than 15.30 following the participant attend the written examination wich will take 1,5 hour. Language: The training is given in English. On request we can also organize this training for groups in Dutch, German, French, Portugese, Polish and Slowakian. If necessary the training can also be booked with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Important: The VOL VCA diploma replaces the former Diploma VVA 2. Note, If you have a VVA1 as well as a VVA2 diploma, of which the VVA1 has expired, automatically the VVA 2 diploma is no longer valid. You should then, depending on your position, take the B-VCA or VCA VOL exam. Prices: VCA Superior €275,- VCA Basic €275,- VCA Superior exam only €125,- VCA Basic exam only €115,- Mentioned prices for this training are including: text book and written examination.

The VCA Supervisor exam is a part of every STC-KNRM VCA Supervisor course. It’s also possible to do the examination only. If you choose not to do the VCA Supervisor course and want to study for the exam by yourself we refer you to the website of Pontifex to order a textbook. VCA Supervisor books are available in Dutch, English and German. The VCA Supervisor Exam consists of 70 multiple choice questions. 49 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 105 minutes. The exam will be taken by Pontifex. Language: This VCA Supervisor Exam is in the English language but can also be booked in Dutch, German and French Do you wish to book this course in another language? Please select VCA Supervisor Exam and choose your language. Location: Through our website you can book directly for Pontifex locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.

The 1-day basic safety course VCA for Supervisors (VOL-VCA) is in Dutch and is primarily intended for managers and team leaders who in this role need the VOL-VCA diploma. During the VOL-VCA course participants learn how to work safely (or delegate) and how people can be motivated to work safely and responsibly. Using the STC-KNRM VOL VCA textbook,  students are being prepared for VOL-VCA exam  by an experienced instructor, which is taken at the end of the course. This training is provided by STC B.V. This VCA VOL Dutch contents: Leglislation; Risk of accident; Hazardous substances; Fire hazard; Explosion hazard; Working in confined spaces; Common working safely; Working safely with electricity; Safely working with tools; Safely working with hoist and forklifts; Safely working at heights; Lifting, tripping, slipping and falling; Personal protective equipement. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.00 on this training day. Training ends no later than 15.30 following the participant attend the written examination wich will take 1,5 hour. Language: The training is given in English. On request we can also organize this training for groups in Dutch, German, French, Portugese, Polish and Slowakian. If necessary the training can also be booked with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Important: The VOL VCA diploma replaces the former Diploma VVA 2. Note, If you have a VVA1 as well as a VVA2 diploma, of which the VVA1 has expired, automatically the VVA 2 diploma is no longer valid. You should then, depending on your position, take the B-VCA or VCA VOL exam. Prices: VCA VOL in Dutch €210,- VCA Basis in Dutch €210,- VCA VOL exam only in Dutch €75,- VCA Basis exam only in Dutch €59,- Mentioned prices for this training are including: text book and written examination.

The VCA VOL Exam Dutch is a part of every STC-KNRM VOL VCA course. It’s also possible to do the examination only. If you choose not to do the VOL VCA course and want to study for the exam by yourself we refer you to the website of Pontifex to order a textbook. VOL VCA  books are available in Dutch, English and German. The VOL VCA Exam Dutch consists of 70 multiple choice questions. 49 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 105 minutes. The exam will be taken by Pontifex. Language: This VOL VCA Exam is in the Dutch language but can also be booked in English, German and French. Do you wish to book this course in another language? Please select VOL VCA Exam and choose your language. Location: Through our website you can book directly for Pontifex locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.

The 1-day basic course for Security and Intermediary Supevisors VCU (VIL- VCU), as the name suggests, primarily intended for Managers and Intermediaries of agencies.In this course they learn about general safety and get the specific knowledge required to get others to work safely.To obtain VCU certification as an employment agency it is mandatory that each Intermediary, with more  than 3 months’ service, is in the possession of the VIL VCU certificate.Since the final objectives of the exam VIL VCU hardly differ from the VOL VCA, the Open Enrollment course is combined. VIL VCU participants will further receive (different) course information before and during the course.Together with the clearly written text book, the students are being prepared by an experienced instructor for the VIL-VCU exam. This VIL VCU training contents: wellfare legislation; legislation for intermedaite labor; legislation; risk of accident; hazardous substances; fire hazard; explosion hazard; working in cconfined spaces; common working safely; working safely with electricity; safe working with tools; safe working with hoist and forklifts; safe working at height; job risc analysis; personal protective equipment. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 08.15 on this training day. Training ends no later than 15.30 following the participant attend the written examination wich will take 1 hour. Language: The training is given only in Dutch. If necessary the training can also be booked with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Prices: VIL VCU €210,- Mentioned prices for this training are including: text book and written examination.

The VIL VCU Exam Dutch is a part of every STC-KNRM VIL VCU course. It’s also possible to do the examination only. If you choose not to do the VIL VCU course and want to study for the exam by yourself, we refer you to the website of Pontifex to order a textbook. VIL VCU textbooks are available in Dutch and English. The exam VIL VCU consists of 70 multiple choice questions. 49 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 105 minutes. The exam will be taken by Pontifex Certificatie. Language: This VIL VCU Exam is in the Dutch language but can also be booked in English. Do you wish to book this course in another language? Please select VCA Supervisor Exam and choose your language. Location: Through our website you can book directly for Pontifex locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.

The VIL VCU Exam is a part of every STC-KNRM VIL VCU course. It’s also possible to do the examination only. If you choose not to do the VIL VCU course and want to study for the exam by yourself, we refer you to the website of Pontifex to order a textbook. VIL VCU textbooks are available in Dutch and English. The exam VIL VCU consists of 70 multiple choice questions. 49 questions must be correctly answered to pass the exam. It is a computer exam, the exam will take maximum 105 minutes. The exam will be taken by Pontifex Certificatie. Language: This VIL VCU Exam is in the English language but can also be booked in Dutch. Do you wish to book this course in another language? Please select VCA Supervisor Exam and choose your language. Location: Through our website you can book directly for Pontifex locations: Capelle a/d Ijssel, Dordrecht, Den Bosch, Ridderkerk, Rijswijk, Rotterdam en Sliedrecht. Would you rather participate at 1 of the other 22 locations throughout The Netherlands please contact STC-KNRM at 0800-1412. Almere, Amsterdam, Apeldoorn, Coevorden, Drachten, Eindhoven, Enschede, Geleen, Goes, Groningen, Haarlem, Leeuwarden, Middelharnis, Midwoud, Moerdijk, Nieuwegein, Nijmegen, Velsen-Noord, Vierlingsbeek, Vierpolders, Waddinxveen en Zwolle. Registration The registration deadline for exams have changed from 24 hours to 48 hours. This means that all exams are requested at VCA Infra at least 48 hours in advance. We can not accept registrations that are made a day in advance.

The instruction is a short practice-based instruction. The AED can save lives and it is of importance that staff has knowledge concerning heart failure and the use of an AED. During the instruction the participants practice with an trainingsdevice. This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. This training contents: Why perform CPR with an AED Techniques of the AED Use of the AED Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in several occasions and therefor training times may vary. Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional information For groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option).

The 2-day ERO Basic course “Emergency Response Officer” (ERO, in Dutch BHV Basic) is for people that want to become the aid worker at their workplace. The participants are trained in all the tasks involved in being an aid worker. These are i.a evacuation, aftercare, fire control and communication during an incident. This training is provided by STC B.V. This ERO Basic course contents: Part 1: Life-saving General rules for the provision of first-aid (5 important points) Emergency transport hold "Rauket" Vital functions Rescue breathing and CPR (for adults) Use of AED Suffocation and poisoning Shock External (severe) bleeding and how to use bandage Local injury (burns, fractions, eye injuries) Part 2: Communication, fire control and evacuation. Tasks of the aid worker Communication during a incident Fire control (fire three-and pentagon, fire stages, small fire extinguishers) Evacuations Importance of aftercare Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.00. All training days end no later than 17.00, unless the participant attends additional training(s). For separate groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option). Language: The ERO Basic training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional Locations: All  emergency response officer (ERO)’’ trainings can be performed at STC-KNRM. When your facilities pass our requirements, the training can also be performed at your location. Prizes: ERO Basic €329,- ERO Basic Refresher €189,- ERO Leader €429,-      

The 1-day training ERO Refresher (in Dutch BHV) is there to maintain the knowlegde and skills of the Emergency Response Officers and to keep them informed about the latest developments in this field. This training is provided by STC B.V. This ERO Refresher course contents: Part 1: Life-saving General rules for the provision of first-aid (5 important points) Emergency transport hold "Rauket" Vital functions Rescue breathing and CPR (for adults) Use of AED Suffocation and poisoning Shock External (severe) bleeding and how to use bandage Local injury (burns, fractions, eye injuries) Part 2: Communication, fire control and evacuation. Tasks of the aid worker Communication during a incident Fire control (fire three-and pentagon, fire stages, small fire extinguishers) Evacuations Importance of aftercare On request we also give an AED instruction during this course. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 17.00, unless the participant attends additional training(s). For separate groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option). Language: The ERO Refresher training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants need to have a valid ERO Basic certificate. Additional Locations: All  emergency response officer (ERO) trainings can be performed at STC-KNRM. When your facilities pass our requirements, the training can also be performed at your location. Prizes: ERO Basic Refresher €189,- ERO Basic €329,- ERO Leader €429,- We assume that the participant possesses an ERO book from NIBHV. If desired STC-KNRM can provide this book for euro-19,50 a piece.

The 2-day training ERO Leader (emergency response officer leader) is for those people whom guard the total safety in case of a disaster. They are also designated to step up as a leader for other emergency response officers in case of distress. This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl     This ERO Leader training contents: Evacuation Preparation for leading the ERO-team Practicing with ERO-team  Estimate the safety situation of the location Management and control the available resources  Evaluation and reporting of the training Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.00. All training days end no later than 17.00, unless the participant attends additional training(s). For separate groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option). Language: The ERO Leader training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional Locations: All  emergency response officer (ERO)’’ trainings can be performed at STC-KNRM. When your facilities pass our requirements, the training can also be performed at your location. Prizes: ERO Basic €329,- ERO Basic Refresher €189,- ERO Leader €429,-

The 3-day basic course First Aid gives you a diploma from ‘’Oranje kruis’’. A person with a First Aid certificate has more skill and expertise in offering lifesaving help than an ERO-er. When a company has a higher than average risk for a big incident the company needs to have a staff member that is certified to provide First Aid. During the course you learn what you should do, but also what you really shouldn’t do. The course is taught by a doctor and a First Aid instructor. To make the practising as real as possible we use ”volunteer victims”(LOTUS slachtoffers). This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl This First Aid course contents what to do with: Stopped blood circulation; Disturbances in consciousness; Disturbances in breathing; CPR; Severe external bleeding; Shock; External wounds; Burns; Bruises and sprains; Dislocation and fractures; Eye injuries Intoxication; Electrical accidents; Injuries caused by heat; Injuries caused by cold; Transport over short distances. Planning: This training is provided by STC B.V. The course schedule can be found on their website: www.stc-bv.nl Training times: We expect the participants at 07.45 on the first training day. The following days start at 08.00. All training days end no later than 16.00, unless the participant attends additional training(s). For separate groups and in-company training the times and course formats can be adapted (evenings and weekends are also an option). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional Locations: All First Aid trainings can be performed at STC-KNRM. When your facilities pass our requirements, the training can also be performed at your location. Prizes: First Aid €499,- First Aid Refresher €219,-

The 1-day refresher ‘’First Aid’’ is there to maintain the knowledge and skills of the providers of First Aid and/or to extend the First Aid certificate of ‘’Oranje Kruis’’. The practical skills are refreshed and several practical accidents are worked out in cases with LOTUS victims. Next to that the theory is refreshed. By attending this refresher every year providers of First Aid make sure they have the required level to qualify for an extension of their certificate. This training is provided by STC B.V. This First Aid Refresher course contents what to do with: Stopped blood circulation; Disturbances in consciousness; Disturbances in breathing; CPR; Severe external bleeding; Shock; External wounds; Burns; Bruises and sprains; Dislocation and fractures; Eye injuries Intoxication; Electrical accidents; Injuries caused by heat; Injuries caused by cold; Transport over short distances. Planning: Are you interested in this training? Please use the “book now” button for availability and book your course. Training times: We expect the participants at 07.45 on this training day. Training ends no later than 16.00, unless the participant attends additional training(s). For separate groups and in-company training the times and course formats can be adapted (evenings and weekends are also an option). Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants need to have a valid Fisrt Aid certificate. Additional Locations: All First Aid trainings can be performed at STC-KNRM. When your facilities pass our requirements, the training can also be performed at your location. Prizes: First Aid Refresher €219,- First Aid €499,-

The Gas Measurement training (Nogepa code 1.4) is intended for people who work at a mine installation and who are responsible for testing and measuring whether gas, oxygen and / or toxic substances are present. The participants learns in theory and in practice the use of gas measurement and detection equipment, the interpretation of the measurement data and taking the right actions. Intended for: Persons designated to carry out gas measurements. Objective: To train the delegate in the theory and practice of the operation and the use of gas measurement and detection equipment, the interpretation of the measured data and taking the correct actions. This Gas Measurement training contains: Gas measurement strategies.  Measurement principles, procedures and rules. Various types of measurement and detection apparatus. Interpret the measured data. State/advice about the correct follow-up actions. Advice regarding safety provisions and personal protective equipment. Enclosed spaces.

The Compressed Air Emergency Breathing System (CA-EBS) training is a result of the CAA Report (CAP 1145), developed for passengers in the UK sector whom travel by helicopter to and from an offshore installation or schip. Starting from September 2014 this training is mandatory for the UK sector and by May 1, 2015 this training is also mandatory in the Netherlands. The aims and objectives of the training are to ensure that the delegate gains the required knowledge and understanding of the particular hazards and properties of a CA EBS  and appropriate practical emergency response. The training is OPITO and NOGEPA approved. This CA-EBS training can also be booked as an "On Board" training via STC-KNRM at 0800-1412  This CA-EBS training contains: The fundamental differences between re-breather and compressed air systems (technology and use); The rationale and use of compressed air emergency breathing systems in helicopter emergency situations; The hazards associated with compressed air emergency breathing systems. To successfully complete this training, delegates must be able to demonstrate: A pre-flight inspection of the life jacket and CA-EBS; Donning the life jacket with CA-EBS correctly, including ‘buddy check’; Emergency deployment in a dry environment. Planning: This training can also be booked as an "On Board" training via STC-KNRM at 0800-1412  Training times: This training is given in addition to BOSIET, FOET or HUET training and therefore starting times may vary. Language: The training is in English. On request, we can organize this training in a different language for groups  and if necessary with an interpreter. Additional services: The following additionals can be booked in addition to the CA-EBS course: NOGEPA medical approval Personal Safety Logbook H2S Training – NOGEPA If both CA-EBS and H2S are booked following a FOET or HUET, one of the additional courses will be moved to a subsequent day. Additional information Delegates must possess a valid BOSIET, FOET or HUET certificate prior to attending the Compressed Air Breathing System (CA-EBS) Initial deployment Training program.

During the S-cape evacuation system, the student teaches the theory and practice of using the S-cape evacuation system. Under well-simulated conditions in our pool where reality is approached, the student will master the system. This allows the student to descend safely downwards with the S-cape evacuation system. This course is for anyone interested, working on an offshore installation where the S-cape evacuation system is available. Theory of S cape evacuation system The operation of S cape Evacuation system Storage offshore Making the S cape Evacuation system ready for use Practice descending using the S cape Evacuation system Practice descending in a rescue fleet using the S cape Evacuation system Planning and timings: This training can be combined with the BOSIET / FOET or HUET, in which the timings may vary. Language: The training is given in English or Dutch. On request, the training for groups can be organized in another language with the use of an interpreter.

IMIST stands for International Minimum Safety Safety Training and is an OPITO standard that supports the global oil and gas industry to achieve safety initiative targets. The IMIST e-learning programme has been developed to provide a new global standard for Health and Safety training, which will provide a comprehensive and consistent level of training across the world and enhance workforce safety and compliance. The IMIST standard ensures that workers have the necessary safety awareness and training to reduce risk and ultimately reduce the number of incidents. The IMIST standard ensures that the employee has the necessary security awareness and training to reduce the risk and ultimately reduce the number of accidents. The IMIST certificate is valid for 4 years. The e-learning and the exam are available in the following 12 languages: American and British English, Arabic, Hindi, Malaysian, French, Vietnamese, Thai, Indonesian, Russian, Kazakh and Danish. IMIST starts with an introduction that assesses knowledge of oil and gas industry employees about safety, based on various questions. The given answers are evaluated, after which a unique course for the participant is compiled. Based on the incorrect answered questions, an e-learning is compiled. Each participant is pursuing a special knowledge-based e-learning. The topics that are answered incorrectly are dealt with again, until the participant answers all questions correctly. Do you want to organize this e-learning for a team of employees at the location of your choice? Please contact us for the possibilities!

You can now also get your first aid Red Cross certificate at STC-KNRM! From unconsciousness to swallowing and from burning injuries to poisoning; Make sure you know what you need and practice all skills during our first aid course. Reanimation and use of the AED are also part of this course. Content Duration 8 hours online preparation and 4 hours classroom Save time by exercising online with the theory. Knowledge tests and clear videos make this online theory anything but boring. Practical exercises will be conducted in the  classroom with your colleagues Learning objectives and subjects To ensure the safety of a casualty to assess the condition, to alert emergency services and to provide  first aid to: Cardiac arrest: Resuscitation and use of an Automatic External Defibrillator (AED) Consciousness, choking Burns, skin wounds, bleeding, nose bleeding Head injury, nerve and vertebral injury Poisoning Pain in the chest, stroke Bone injuries, muscles and joints Conditions E-learning module: 1 year unlimited access to the online learning environment. As a result,  proof of participation (also admission ticket to the classroom course) Classical session: A European recognized Red Cross certificate (two years valid) A course folder with all subjects of this course Planning Are you interested in this training? Use the "book direct" button to view the schedule and book the training. Timing Yhe participants are expected to register at 08.00, the training is from 08.30-12.30 Language The training is given in English or Dutch

This 3-day practical Banksman offshore training is specifically designed for operational personnel on ships and/or oil platforms involved in hoisting operations. The purpose of this Banksman training is for participants to perform hoisting operations safely, responsibly and efficiently in cooperation with the crane operator. This certificate within the (petro) chemical industry in the Netherlands for an exemption for the "SOG BVL and VVL-H 'licenses and can be followed instead of these courses. This training consists of a combination of theory instruction, hands-on exercises and practical exercises with the crane and other hoisting equipment. The following topics are covered. Materials and Equipment ( mong others Fibre Ropes, Fibre Slings, Wire Ropes, Slings, DNV 2.7-1 container, Shackles, Chains, Hoists and Winches, Lifting Beams and Spreader Bars, Sheave Blocks, ROV Equipment) Select the safest and most efficient materials and equipment Latest developments Recognizing unsafe materials and equipment Cranes Hoisting of Personnel Anchor handling Rules and Regulations Basic load calculations Certification, Inspection and Marking Safe use of materials Course format This Banksman Training consists of three consecutive days instruction from 08.00 to 16.30 for groups up to 8 participants. Both the theoretical and the practical part will be closed with a test. Certificate Participants who pass the theoretical and practical exam receive a Banksman NOGEPA 1.9A certificate. This certificate is valid for 4 years. Language The training is performed in English. In the case of Dutch speaking groups the instruction can be provided in the Dutch language, but training materials and examinations are in English. Location The training can be held at the STC-KNRM Training Centre in Rotterdam where all necessary facilities are available. On request we can also organize this training at other locations around the world, for example close to a project. Prerequisite There are no specific prerequisites for this course. If partcipants need to work Offshore, a valid Offshore medical exam is oblgated. Price The price is € €995,-- (inclusive registration fee) per participant. This price includes all training materials, the theoretical and practical exam and lunch, coffee and tea. Not included in the price are: Transport to and from possibly selected hotels for € 15, - per day.. 21% VAT. All prices exclude VAT.

This H2S (Nogepa 0.8) is intended for persons working anywhere where hydrogen sulphide gas can be expected or has been found. The aim of this training is to inform the delegates on the health and safety issues related to hazards and risks of hydrogen sulphide gas and to equip them with the basic emergency response knowledge and skill. This H2S training contents: Knowledge of the properties and hazards of H2S; Knowledge of working activities on a H2S location; Knowledge of the necessary layout on an H2S location; Handling, use and restrictions of the specific compulsory personal protective equipment; Handling, use and restrictions of personal detection/alarm equipment; Escape procedures in case of an H2S alarm; First aid in case of H2S victims; Knowledge of H2S rules in the Working Condition Act (Arbowet). Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in addition to BOSIET, FOET or HUET and there for training times may vary. Language: The training is given in English. We can organize this training in a different language for groups on request and if necessary with a private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements.

Are you looking for a safety training tailored to your specific security needs? Please contact STC-KNRM at 0800-1412. We will do everything in our power to provide you with a suitable package!

The instruction is a short practice-based instruction. The AED can save lives and it is of importance that staff has knowledge concerning heart failure and the use of an AED. During the instruction the participants practice with an trainingsdevice. This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. This training contents: Why perform CPR with an AED Techniques of the AED Use of the AED Planning: This training can be booked as an "On Board" training as well as a regular course. In both cases we ask you to contact STC-KNRM for booking this course. Training times: This training is given in several occasions and therefor training times may vary. Language: The training is given in Dutch. We can organize this training in a different language for groups on request and if necessary with an private interpreter. Requirements for participation: In order to participate in this training, participants do not need to have any specific requirements. Additional information For groups and in-company trainings the times and course formats can be adapted (evenings and weekends are also an option).

The training Breathing Apparatus is a tailor made training, which take approximately 8 hours. The content of this training is drawn up together with you, so your employees are well prepared for their jobs. The Breathing Apparatus training can contain the following subjects: Breathing Techniques The different types of equipment Check and use of the deviceS Use of the different types of devices Maintenance of equipment Practical exercises with the devices Possibilities We can organize this training on your location (for example aboard a vessel) or at our training centre. Please dont hesitate to contact us to discuss the possibilities and to get a quote.